Here at Kagmo Electric Motor Company., Vaughn Electric Company Inc., and Tennessee Electric Motor Company, we would like to thank you for the interest in the services we offer. We are a 24/7 emergency service center and are happy to assist you in any way that we can. Listed below are some of the services we offer. If you would like more information, want to inquire about a quote, or need to schedule a service, please contact our Electro-Mechanical Service Manager below:
Colton Carr
Electro-Mechanical Service Manager
Vibration Analysis:
When applied in an industrial or maintenance environment, vibration analysis aims to reduce maintenance costs and
equipment down time by detecting equipment failures long before the problem becomes evident to the human ear. We work with customers to set up custom trending routes to cover all areas that are needed. The equipment we use for this process is the Ludeca Betavib.
On Site Balancing:
We balance – Air handlers, Cooling Tower Fans, Pumps, Motors, Generators, Couplings, Induction and Force Draft Fans and Blowers.
Benefits:
- Reduce bearing loads and structural stress.
- Improved running conditions.
- Lower operating costs and energy consumption.
- Increase performance, machine availability and length of service.
- Minimize noise vibration.
- Reduce impact of noise on operator to enhance their efficiency.
- Increase personal safety.
When you combine these benefits with the reduced expense from not having to remove, ship and reinstall equipment, you will have a winning combination.
The equipment we use for this process is the Ludeca Betavib.
Laser Alignment:
Proper alignment will prolong the life of your equipment. Reduced energy consumption
and significant power savings can be produced through accurate alignment. This
eliminates reaction forces and reduces energy consumption up to 10%.
It can reduce mechanical seal repairs by up to 65% when performed on a regular basis.
The equipment we use for this process is the Easy-Laser XT770.
Infrared Thermography:
Infrared Thermography has the ability to detect several conditions that go unnoticed until too late. Conditions detected include – overloads, loose connections, inductive heating, open circuits, harmonics, unbalanced loads and defective equipment. The equipment we use for this process is FLIR T1020.
Benefits:
- Safe
- No shut down needed
- Identifies exact problems
- Lowers insurance premiums
Our thermographers have Level II Certifications!
Ultrasonic Analysis:
We have a new ultrasonic tester that allows us to predict failures before they happen. Some of the things we can look at with this system are:
- Equipment Bearings
- Air systems to check for leaks
- Many more
Underground Location:
We have an underground locator that we use to locate underground wires and cables.
Use:
- Locate buried cables and wires
- Determine cable depth
- Test the current running through the wires/cables
- Locate Sheath Faults
Benefits:
- Save time by finding exactly where the wire is bad faster
- Save money by not having to dig as large a hole to repair problems
Fall of Potential (Ground) Testing:
The fall of potential test is used to accurately measure the resistance of an earth electrode using auxiliary stakes driven into the soil, which form a circuit for the test current injection and voltage measurement. Poor grounding is one of the leading causes of equipment malfunction.
Why we test this:
MSHA requires fall of potential testing to be done on an annual basis, or when equipment location is changed.
Benefits:
- Reduce equipment malfunction due to improper grounding
- Increase safety by testing for proper energy dissipation
PLC Monitoring:
The use of Programmable Logic Controllers (PLC’s) are mainly to help automate systems. Though they can also be used to help maintain your equipment. PLC’s can be set with certain intervals to remind the user of service periods and equipment to check. They can also monitor trends to aid in troubleshooting specific problems.
Benefits:
- Latest technology to monitor and maintain your equipment
- Very flexible system
- Eliminates older technology
- Less cost in wire to devices as this new technology allows monitoring via radio waves
Insulation Testing:
Insulation testing can tell us how good the insulation is on a motor, wire or piece of equipment. By monitoring this on a periodic basis we can determine insulation breakdown and suggest taking action before catastrophic failure occurs. By taking action before failure occurs, you can reduce or discard any down time.
Benefits:
- See a failure coming before it happens
- Prevents many catastrophic failures
- Checking for proper grounding of equipment
Shaft voltage testing:
Due to the rapidly switching waveforms of VFD’s (Variable Frequency Drives), bearings can be damaged because of electrical current induced on the shaft. Without proper grounding on VFD applications, bearings will experience what is called “fluting”. To help prevent fluting from occurring, we recommend AEGIS shaft ground rings. With the use of our Fluke portable oscilloscope, we can determine if any shaft voltage is present.